Room disinfection spray machines

Close filters
  •  
from to
 
No results were found for the filter!

Comprehensive room disinfection is best solved with a nebulizer. They are the modern and effective answer in the fight against germs. The devices are used whenever classic wipe disinfection reaches its limits. By spraying disinfectant in the form of aerosols, a room can be comprehensively disinfected. This is particularly the case in critical areas where there are increased hygiene requirements. Especially in rooms where immunocompromised persons are present, the nebulizing devices are recommended by experts. In addition to effective surface disinfection, the devices also eliminate germs in the air. In this way, contamination via the room air can be reduced and bad odors removed at the same time.

Application

The devices can be used preventively at regular intervals for room disinfection or at the end of a treatment as a final disinfection of a room. The automatic room disinfection with the help of a nebulizer achieves considerable improvements compared to classical disinfection methods. The devices are used for comprehensive room disinfection, through aerosol disinfection you have the positive side effect of air purification and odor neutralization.

Typical areas of application:

  • ongoing room disinfection in critical areas
  • Room disinfection after disease outbreak
  • Combating viruses in veterinary areas
  • partly also in building cleaning to combat mold contamination

Application steps of the SaniSwiss Automate AHP:

  1. Place Automate AHP in a corner of the room
  2. Set room size and press start
  3. Leave room
  4. Automatic fogging
  5. wait for 30 minutes contact time
  6. Ventilate the room for a few minutes

Advantages of the SaniSwiss Automate AHP

The Automate AHP is a handy and state-of-the-art disinfection device from SaniSwiss. The Swiss company stands for the highest quality standards and state-of-the-art technological infection prevention.

Minimal preparation

The dry mist sprayed by the device can even be used on electrical equipment without hesitation. Even materials such as paper, which are susceptible to moisture, are not damaged by the dry mist. Thus, the preparation time before an upcoming room disinfection can be reduced to a minimum. Especially in case of regular disinfection cycles, the time saving is significant.

Fast room disinfection

By entering the room size, the necessary quantity and spraying time are calculated by the machine. After spraying the dry mist, the contact time should be 30 minutes. After successful disinfection, the room should be aired. A full cycle is completed after about 45 minutes.

Easy to use

The Automate AHP from SaniSwiss is extremely user-friendly and can be used by any of your staff without lengthy instruction. Due to its compact size, it can be easily transported by any employee. The mobile system is placed in the corner of a room, where the approximate room size can be easily set on the device. The disinfection machine then automatically calculates the required amount of disinfectant and the spraying time. After that, all you have to do is press the "on" button before leaving the room.

Economy

Due to the nebulization, high effectiveness is achieved with little disinfectant. Only 3ml of disinfectant is needed per cubic meter of room air. The automatic system allows the unit to calculate the exact amount needed, making this system extremely economical.

LOG6 Reduction

Disinfection is basically nothing more than the reduction of the amount of living microorganisms. The effectiveness of disinfection is measured and indicated as a logarithmic function. So-called LOG levels are used, each of which describes the reduction by one power of ten. Consequently, a LOG1 reduction means the reduction of microorganisms by 90%. The SaniSwiss disinfector achieves a LOG6 reduction, which means a reduction of 99.9999%. Thus, only one microorganism out of a million survives the disinfection process.

Aerosols - Function

Aerosols are tiny particles that are sprayed and carried by the air. They are used in various sprays or in the coating and painting of workpieces. But aerosols can also be used in disinfection technology. In room disinfection via a fogging device, a disinfectant is transformed into an aerosol with the help of pressure in the device. The tiny droplets are then distributed as a dry mist in the room air and evenly wet all surfaces. In conventional disinfection methods, this is always user-dependent and comprehensive disinfection can rarely be achieved. Aerosol disinfection is a perfect complement to classical wipe and spray disinfection.

Disinfectant

The disinfectant used in the fogging method is usually a hydrogen peroxide solution (H202). These sprayed microparticles of H2O2 are carried by the air and attach to all surfaces in the room. The sanitizer Automate P disinfectant was developed specifically for cold fogging with the SaniSwiss Automate AHP. The agent is based on the innovative H2O2-boosted technology and is used in the cold fogging process.

Buy room disinfection sprayer

Buy the state-of-the-art and professional SaniSwiss Automate AHP spray fogger directly and easily through our online store and benefit from low prices and fast delivery from Swiss stock. Our offer also includes the matching disinfectants and other products from the hygiene, cleaning, industry and catering sectors. If you have any questions regarding the selection of the right product, please do not hesitate to contact our competent customer service. We at Heros Hygiene Switzerland are happy to help you.