Sanitary cleaner | DR. SCHNELL Milizid Shine Eco

MILIZID SHINE ECO is suitable for the effective cleaning of all acid-resistant surfaces in sanitary and wet areas. Typical areas of application include tiles, stainless steel, chrome-plated fittings, sanitary ceramics, glass and porcelain stoneware. The product can be used with all standard cleaning methods.

Certifications / Standards:
- EU Ecolabel
- RK-listed
- Cradle to Cradle Gold

Product details:
- 1-litre bottle or 10-litre canister
- Highly concentrated liquid
- Removes mineral and organic deposits (e.g. limescale, lime soap, boiler scale, cement residue, urine scale, rust, skin oils, body cream and make-up residues)
- With EASY-to-CLEAN effect for reduced dirt adhesion and easier subsequent cleaning
- Improved grease-dissolving properties
- Suitable for use with all cleaning methods, including soft foam cleaning
- Gentle on chrome, plastic surfaces, acid-resistant tiles and enamel, in accordance with DIN ISO 2722 under normal conditions of use
- With a special drainage effect
- Suitable for use on undamaged fittings
- Effective without mechanical action
- Leaves a shine without the need for polishing

What is the difference compared to DR. SCHNELL Milizid Eco?
- EASY-to-CLEAN effect: MILIZID SHINE ECO leaves behind a hydrophilic protective film that allows water to run off evenly. Limescale and dirt cannot form a firm bond with the surface and are removed effortlessly.
- Collagen-based formula: Inspired by skincare, MILIZID SHINE ECO forms an invisible, nourishing protective layer that shields surfaces such as glass, tiles and fittings from new soiling.
- Enhanced cleaning performance: Even stubborn limescale and grease deposits are a thing of the past with MILIZID SHINE ECO.

Suitable for:

	Chrome		Stainless steel		Glass
	Porcelain		Plastic in general		Glazed ceramic tiles
	Unglazed/porous ceramic tiles		Porcelain stoneware / safety tiles		Polyamide PA
	Suitable		Suitable to a limited extent		not suitable

Instructions for use

Manual and machine-based routine cleaning
Normal soiling: 0.25% – 2.0% (dose 2.5–20 ml per litre of water). For heavier soiling, increase the dose accordingly; use undiluted if necessary. Rinse with clean water after a short contact time.

Cleaning of toilet bowls/urinals
Apply MILIZID SHINE ECO undiluted under the rim, scrub with a toilet brush and rinse after a short contact time (max. 5 minutes). Please note: Lift the toilet seat completely up before application.

Spray cleaning
0.25% – 10%

Interim and deep cleaning:
10 per cent to undiluted. On granite: max. 10 per cent

Sales unit:
1 unit

This product is approved for commercial use only.