Logo mat | inside | motif freely selectable | Colorstar

The ColorStar logo mat is a classic carpet logo mat for indoor use and is ideal for professionally presenting your company logo, slogan or message at the entrance. The customised motif is printed on 100% recycled PET yarn made from plastic bottles. The mat therefore combines a high-quality look with a sustainable material concept. There are 66 standard colour options to choose from for the design. ColorStar is industrially washable and designed for commercial use in entrance areas, lobbies and reception areas.

Cleaning
ColorStar mats can be cleaned in various ways.
- They can be industrially washed (see washing instructions)
- Vacuum regularly (daily in high traffic areas; weekly in lower traffic areas)
- Cleaned with an extractor or hosed down if necessary to remove heavy soiling.

Hang up to dry. Mats should always be dry before they are used again.

Washing instructions
1. Rinse | 2-3 min. at medium water level and a maximum temperature of 49 °C
2. Rinse (optional) | 2-3 min. at medium water level and a maximum temperature of 49 °C
3. Pause | 2-3 min. at a high water level and a maximum temperature of 49 °C
4. Rinse | 2 min. at high water level and cold temperature
5. Rinse | 2 min. at high water level with cold temperature
6. Spin at low level | 1-2 min.
7. Shake out while rotating the drum | 1 min.
8. Extract | at maximum 250G, 3-5 min.
9. Drying (optional) | 5-10 min. at a maximum drum temperature of 82 °C
10. Cooling | 5 min.

Additional recommendations
- For heavily soiled mats, reduce the temperature to max. 60°C.
- The pH value should not exceed 9.5; use non-ionic cleaning agents with a low pH value.
- Do not dry the mats for too long; the basket temperature of the dryer should not exceed 82 °C
- If the mats are not dried, do not dry them for too long If the mats are not dried, the final rinse can be increased to 49 °C. This reduces moisture absorption after removal.
- Lay the mats flat after removing them from the washing machine; allow the mats to cool before rolling them up.

Product details:
- Classic carpet logo mat for indoor use
- Custom print logo, design or artwork on recycled PET yarn
- 66 standard colour options available
- Industrially washable, ideal for commercial use
- Recommended locations: Entrance areas, lobbies, receptions, customer and visitor zones
- Yarn: continuous filament PET, 100% recycled content
- Yarn weight: 900 g/m²
- Pile height: 11 mm
- Total weight: 2.9 kg/m²
- Primary backing: 100% recycled PET nonwoven
- Rubber backing: 100% nitrile rubber, compression moulded, reinforced edges on all four sides
- Polymer content in rubber: 34% recycled material
- Edge thickness: 2.5 mm | body thickness: 1.5 mm | edge width: 2 cm
- Size tolerance: ± 2 %
- Static control: ISO 6356 (2012), walking test -0.3 kVolts, fulfils IBM test requirements
- Flammability: BS 4790 (1987), low radius of ignition effect

Sales unit:
1 roll