Carpet dirt trap | Entrance mat | Indoor & outdoor | WaterHog
The WaterHog entrance mat is a durable dirt-trapping mat for indoor and outdoor use that reliably absorbs dirt and moisture, keeping floors clean, dry and safe. The textured surface design, featuring raised, rubber-reinforced studs, removes dirt and moisture from shoes and traps both beneath the level of the shoes within the mat, ensuring nothing reaches the floor. Raised rubber edging ensures that water and dirt remain on the mat. With an absorption capacity of up to 4 L/m², WaterHog is particularly suitable for entrances, lobbies, reception areas and all zones where the risk of slipping needs to be reduced and moisture controlled. The top layer consists of solid-coloured, needle-punched PET made from 90% recycled plastic bottles; the rubber backing is PVC-free.
For further information, including a preview of the available colours, click on ‘Downloads’ to view the data sheets.
Cleaning
- Not suitable for washing in industrial or commercial washing machines
- Vacuum regularly: daily for high-traffic areas, weekly for low-traffic areas
- Vacuum, clean, high-pressure wash, steam clean or hose down as required
- Hang up to dry
- Allow to dry completely before reuse
Product details:
- Entrance mat for indoor and outdoor use with high scraping, wiping and absorption performance
- Textured surface with raised, rubber-reinforced studs to prevent pinching
- Traps dirt and moisture within the mat below shoe level
- Absorbs up to 4 litres of water per square metre
- Raised rubber edging reliably keeps water and dirt on the mat
- Environmentally friendly: solution-dyed PET made from 90 per cent recycled plastic bottles
- PVC-free rubber backing
- Stain- and bleach-resistant, quick-drying and colourfast (dye-through)
- Durable: reinforced rubber edging reduces tears and breaks
- Antistatic properties; not affected by salt or de-icing agents
- Meets the FF-2-70 flammability standard
- Carpet type: needle-punched, solution-dyed, recycled PET (post-consumer)
- Carpet weight: 820 g/m²
- Total thickness: 7 mm
- Height of rubber studs: 6.4 mm
- Total weight: 2.97 kg/m²
- Backing: SBR rubber (rubber backing), body thickness 1.98 mm
- Edge: 3.63 mm
- Size tolerance: ± 2 % | Weight tolerance: ± 5 %
Sales unit:
1 roll