Logo mat | Indoor | Choice of design | Colorstar

The ColorStar logo mat is a classic indoor carpet logo mat and is ideal for professionally displaying your company logo, slogan or message at the entrance. The customised design is printed on 100 per cent recycled PET yarn, made from plastic bottles. The mat thus combines a high-quality appearance with a sustainable material concept. There are 66 standard colour options to choose from for the design. The ColorStar is industrially washable and designed for commercial use in entrance areas, lobbies and reception areas.

For further information, including a preview of the available colours, click on ‘Downloads’ to view the data sheets.

Cleaning
ColorStar mats can be cleaned in various ways.
- They can be industrially washed (see washing instructions)
- Vacuum regularly (daily in high-traffic areas; weekly in less busy areas)
- Cleaned with an extractor or hosed down as required to remove heavy soiling.

Hang up to dry. Mats should always be dry before being put back into use.

Washing instructions
1. Rinse | 2–3 mins at medium water level and a maximum temperature of 49 °C
2. Rinse (optional) | 2–3 mins at medium water level and a maximum temperature of 49 °C
3. Pause | 2–3 mins at high water level and a maximum temperature of 49 °C
4. Rinse | 2 mins at a high water level and a cold temperature
5. Rinse | 2 mins at a high water level and a cold temperature
6. Spin cycle on a low setting | 1–2 mins
7. Shaking whilst rotating the drum | 1 min
8. Extraction | at a maximum of 250G, 3–5 mins
9. Drying (optional) | 5–10 mins at a maximum drum temperature of 82 °C
10. Cooling | 5 mins

Additional recommendations
- For heavily soiled mats, set the temperature to a maximum of 60°C.
- The pH value should not exceed 9.5; use non-ionic detergents with a low pH value.
- Do not dry the mats for too long; the drum temperature of the tumble dryer should not exceed 82 °C .
- If the mats are not being dried, the final rinse temperature can be increased to 49 °C. This reduces moisture absorption after removal.
- After removing the mats from the washing machine, lay them flat; allow the mats to cool before rolling them up.

Product details:
- Classic indoor carpet logo mat
- Custom printing of logos, designs or artwork on recycled PET yarn
- 66 standard colour options available
- Industrially washable, ideal for commercial use
- Recommended locations: entrance areas, lobbies, reception areas, customer and visitor zones
- Yarn: continuous filament PET, 100% recycled content
- Yarn weight: 900 g/m²
- Pile height: 11 mm
- Total weight: 2.9 kg/m²
- Primary backing: 100% recycled PET non-woven fabric
- Rubber backing: 100% nitrile rubber, compression-moulded, reinforced edges on all four sides
- Polymer content in the rubber: 34% recycled material
- Edge thickness: 2.5 mm | Body thickness: 1.5 mm | Edge width: 2 cm
- Size tolerance: ± 2 %
- Static control: ISO 6356 (2012), walking test –0.3 kVolts, meets IBM test requirements
- Flammability: BS 4790 (1987), low ignition radius

Sales unit:
1 roll